EN
TSD mini size 0.96 inch 80*160 all viewing angle SPI interface 0.96 inch ips lcd display modules
|
Model Name |
TST09607A |
|
LCD Type |
0.96 inch TFT LCD display |
|
Resolution |
80*160 |
|
Viewing angle |
All o'clock |
|
Brightness |
600 cd/m2 |
|
Driver IC |
ST7735S |
|
Interface |
SPI |
|
Touch Screen |
Customize |
|
Operating Temperature |
-20 ~ +70℃ |
|
Storage Temperature |
-30 ~ +80℃ |
- Overview
- Related Products
TSD mini size 0.96 inch 80*160 all viewing angle SPI interface 0.96 inch IPS LCD Display Modules
This 0.96 inch TSD in-car display is small with ultra size so, it can fit into the smallest place inside the car. 80×160 resolution provides basic information display needs. IPS technology, the full viewing Angle, no matter what Angle can clearly see the screen content. The data of SPI interface are all transmitted, which is very efficient, and the picture is guaranteed to be stable, so that drivers can have a convenient and clearer reading experience.
Drawing
General Characteristics
| ITEM | Specification | Unit |
| LCD Type | a-Si TFT,Transmissive,Normally Black | - |
| LCD Size | 0.96 | inch |
| Resolution (W x H) | 80x (RGB) x 160 | pixel |
| LCM (W x H x D ) | 14.04 x 27.95 x 1.71 | mm |
| Active Area (W x H) | 10.8 x 21.7 | mm |
| Dot Pitch (W x H) | 0.135 x 0.1356 | mm |
| Viewing Direction | All o'clock | - |
| Color Depth | 65K/262K | - |
| Pixel Arrangement | RGB Vertical stripe | - |
| Backlight Type | 1 LED,20mA , 3.2V | - |
| Surface Luminance | 400±50 | cd/m2 |
| Surface Treatment | Clear | - |
| Driver IC | ST7735S | - |
| Interface Type | 4 wire SPI | - |
| Input Voltage | 2.8 (Typ) | V |
| With/Without TP | without | - |
| Weight | TBD. | g |
Interface Description
| PIN NO. | Symbol | Description |
|---|---|---|
| 1 | TP0 | No connect |
| 2 | TP1 | No connect |
| 3 | SDA | the serial data input/output signal |
| 4 | SCL | the serial clock input signal |
| 5 | RS | Data/Command Selection pin |
| 6 | RES | Reset input signal active low |
| 7 | CS | Chip select signal Low Enable |
| 8 | GND | System Ground. (0V) |
| 9 | NC | |
| 10 | VCC | Power supply +2.8V |
| 11 | LEDK | Backlight K Cathode input pin. |
| 12 | LEDA | Backlight A Anode input pin. |
| 13 | GND | System Ground. (0V) |
Have any customize requirements, please feel free to Contact Us.
